Design a stained glass panel and print its cutting templates

The stained glass pattern maker is a new tool from the pattern library. Choose one of four original designs, set the panel size and your came, and pick four glass colors.

Samples to start from

• Generating…A sunburst transomOpen with these settings
• Generating…Diamond quarriesOpen with these settings
• Generating…The numbered key for a border and centerOpen with these settings

What you get

• A PDF with a numbered key and true-size templates, with the came allowance applied and a 1 inch check square on every template sheet
• Pieces too big for a page tiled over taped sheets, and listed as such
• A rough glass estimate for each color, including a stated 30% waste allowance
• A panel preview as SVG or PNG

Strict about what can be cut

A score only runs straight from edge to edge, so every piece has straight sides and no inside corners. No corner is under 30 degrees, cut glass is at least 3/4" wide, and long pieces are split. If a design breaks a rule at your size, the tool lowers the detail and tells you. These limits are cautious guidance, not a guarantee, and the estimates are rough, so verify with your came and your supplier.